#

For everyday chores in the kitchen to turn from duty to pleasure, it must be equipped functionally and beautifully. In the article we will tell you how to choose a faucet for the kitchen, make an overview of the assortment presented on the Russian market, and share the secrets of what to consider when buying.

#

Kitchen faucet requirements

The kitchen is the place where the most water is consumed. The tap opens about a hundred times a day: to wash hands, food, dishes and other utensils. Therefore, the requirements for the mixer are more stringent in comparison with other plumbing fixtures.

  • Reliability. Materials and construction must be able to withstand repeated heavy use.

  • Convenience. Often the hands of the hostess are stained with grease or are busy, it is inconvenient to open the tap. It is in the kitchen that we also have to wash non-standard items: large pots, wide pans. It is important that the water can be easily opened and that the spout does not interfere with washing the dishes.

  • Aesthetics . In Russian apartments, the kitchen is not only a household area, but also a room for guests. This is especially true for studio apartments, where the living room and kitchen are combined. The faucet must blend in harmoniously with the interior.

Manufacturers are trying to combine all these requirements. Below we have made a detailed overview of the model range presented on the Russian market, so that it is easier for you to navigate and choose the appropriate option.

What are kitchen faucets: an overview of the range

At first glance, it seems that the manufacturers only play up the design of the mixers, but otherwise they are the same. We will dispel this misconception. There are several characteristics of the product that must be considered when choosing.

Control method

The ease of operation of the crane depends on the control. The following models are presented on the market:

  • Single-lever are the most popular. The regulation of the pressure and temperature of the water takes place by displacing one lever. You can even do this with your finger. It is enough to set a comfortable temperature level once and then just raise the lever. This saves water consumption. According to manufacturers, the cartridge, which is responsible for the water supply, is designed for at least a million inclusions. Models are sensitive to solid particles in water, so we recommend installing a coarse filter on the pipes to extend the life of the plumbing.

#

  • Two-valve - the usual models with two taps for supplying cold and hot water. They have a simple and straightforward mechanism of work. In the event of a breakdown, they can be repaired without calling the master: it is necessary to replace the valve-box - the locking mechanism responsible for the water supply. It can be rubber or ceramic. The first is less reliable, but easy to pick up. The second one is more wear-resistant, but in order to purchase a suitable part, you need to take a photo or the crane itself to the store, because there are no uniform standards for the production of ceramic axle-boxes, they need to be selected after the fact. Also, the models are inferior to single-lever models in terms of convenience. As a rule, they are chosen based on personal preference or interior design.

  • Non-contact touch sensors respond to the approach of the palm using a built-in infrared sensor. As soon as you remove your hand, the water automatically stops flowing. Thermostats are built into the design.

    Things to know (Q&A)

    Which faucet is best for kitchen?

    If you have separate handles for hot and cold, you have three holes in the sink. Measure the distance between the handles. Hold the the tape measure above the faucet if it's in the way . If the distance is six inches or more you need a “widespread" or “eight inch spread" faucet.

    What is the most popular finish for kitchen faucets?

    If you have separate handles for hot and cold, you have three holes in the sink. Measure the distance between the handles. Hold the the tape measure above the faucet if it's in the way . If the distance is six inches or more you need a “widespread" or “eight inch spread" faucet.

    What is the most durable finish for faucets?

    Brushed nickel is arguably the most durable finish on the market. Plus, it doesn't show water spots or fingerprints. Cons: Brushed nickel doesn't pair well with stainless steel fixtures and accessories. It needs to be wiped down regularly and should not be cleaned with abrasive cleansers, or the finish may tarnish. 16

    What faucet finish is in Style 2021?

    2021 Faucet Finish Trends: Brushed Gold & Matte Black | Pioneer Industries. 17

    What is the trend in faucet finishes?

    Classic Nickel

    Nickel comes with long-lasting finishes and can be polished. The classic nickel look adds character while keeping the space simple and clean. Your typical color scheme will work just fine, which is why classic nickel is among the most popular faucet color trends in 2020.

    What is the trend for kitchen faucets?

    Smart kitchen faucet

    Faucets are going hi-tech and will become a popular trend in 2021. Such devices can be turned on contactless or can be activated by voice command. While touchless faucet has been around for a while, the pandemic has only but stressed its importance. 25

    Do all faucets fit all sinks?

    Not all bathroom sink faucets work with every sink, so it's important to make sure the faucet you choose will fit your sink or basin . Standard faucet drillings are centerset, single-hole or widespread.

    How do I know what size my faucet is?

    Size: Aerators typically come in one of two sizes: regular (usually 15/16” Male or 55/64” Female) and junior (usually 13/16” M or 3/4” F). You can measure your faucet, or use a simple shortcut using coins. If your faucet is roughly the size of a nickel, it needs a regular-size aerator.

    Do all faucets fit all sinks?

    Not all bathroom sink faucets work with every sink, so it's important to make sure the faucet you choose will fit your sink or basin . Standard faucet drillings are centerset, single-hole or widespread.